Laser cutting files that fit the first time

Free tools for laser makers that check their own files before you download them: true size in millimetres, every cut closed, nothing cut twice, and joints that fill every wall. Everything runs in your browser; nothing is uploaded.

Tools

  • Box generator

    Make a finger-joint box or a tray with dividers for your laser. Measure your kerf, set the size, download SVG or DXF for LightBurn, xTool or Glowforge.

  • Finger joint box generator

    Generate a closed finger-joint box with joints sized for your kerf and material thickness. Every joint is checked before you download the file.

  • Tray generator

    Design a laser-cut tray or organiser with crossing dividers. Pick the compartments, thickness and kerf; get cut files that slot together.

  • Kerf test

    Download a kerf test card for your laser: a comb and a key with labelled widths. The pair that fits snugly tells you your kerf to 0.025 mm.

  • SVG to DXF

    Convert SVG to DXF in millimetres for your laser or CNC. Lines that touch are joined, open shapes and double lines are shown before you download.

  • Image to DXF

    Trace a PNG or JPG into a DXF for your laser: set the width in mm and the darkness threshold, then cut the outlines or engrave the shapes.

Start with your kerf

Every laser burns away a strip of material as it cuts. Joints only fit when the file knows how wide that strip is on your machine. Cut the kerf test card once per material, read the value from the pair that slides together snugly, and use it in the box and tray generators.

Made for your laser program

Downloads are SVG or DXF in millimetres, with cuts in red, scores in blue and engraves in black, the colours LightBurn uses for its first layers. Pick LightBurn, xTool Creative Space or Glowforge to see what is left to set after import.