Image to DXF for laser cutting
Trace a PNG or JPG into a DXF in millimetres. Set the width and the darkness threshold, then cut the outlines or engrave the shapes. The picture never leaves your browser.
Your drawing appears here, at true size, with every line checked before you download it.
From pixels to cut lines
A laser follows lines, and a picture has none: it is a grid of coloured dots. To cut it, the picture is first turned into black and white with the darkness threshold, then the edge of every dark area is traced into a smooth closed outline. Holes stay holes, so the inside of an “O” or a ring is kept. The outlines are scaled so the whole image is as wide as you asked, and written as a DXF in millimetres.
Getting a clean trace
- Start from the largest, sharpest version of the image you have.
- Move the threshold until thin parts are solid but the background stays empty.
- Use “Trace the light areas instead” for white artwork on a dark background.
- Raise “Ignore specks” to drop dust and JPEG noise; lower it to keep small details.
- “Fine” keeps corners and small details, “Smooth” rounds edges for wood and acrylic.
Cut or engrave
With “Cut out”, every outline is a cut line, so each dark shape drops out of the sheet as a part. Thin isolated bits fall out too, so a stencil needs bridges you add in your drawing program. With “Engraved”, the dark areas become filled engrave shapes that your laser program fills line by line. Both are checked: every outline closed, nothing cut twice, no crossings.
Already have a drawing? The SVG to DXF converter keeps its exact lines. For boxes, see the box generator.
Questions
Which pictures trace well?
Logos, silhouettes, stencils and drawings with clear dark shapes on a light background. Photos with soft shading turn into blotches; for photos, use an engraving program instead.
How do I set the size?
Enter the width the whole image should have in millimetres or inches. The height follows the picture's proportions.
What does the darkness threshold do?
Pixels darker than the threshold become part of a shape, lighter ones become background. Raise it to include grey areas, lower it to keep only the darkest parts.
Can I engrave instead of cutting?
Yes. Choose “Engraved” and the dark areas become filled engrave shapes, with their holes kept.