Laser cut box generator

Finger-joint boxes and trays that fit the first time. Measure your kerf, set the size, and download a file that is checked before you get it. Everything runs in your browser.

1 Your laser’s kerf

Not sure? Cut the test card first

Cut both pieces from the material you will use. Try each tooth in the notch with the same label. The pair that slides in snugly is your kerf.

2 Your box

Make
Top
These sizes are
Material thickness
Joint fit

joints close by hand

3 Download

  • Assign cut, score and engrave settings to the red, blue and black shapes.
bottomfrontbackleftright
  • Files check out: true size in mm, every cut closed, no line cut twice, parts at least 3 mm apart.
  • Joints check out: the 5 parts, put back together, fill every wall exactly once (1,560 cells tested).
  • Each joint is cut for a kerf of 0.15 mm with no extra play.

Why joints from other generators come out loose

A laser does not cut a line: it burns away a strip of material, the kerf. If a box file ignores it, every finger ends up a little narrower and every slot a little wider, and the box rattles. If the file guesses the kerf wrong, the joints are too tight to close. Most generators ask for a kerf value without telling you how to find it, and some want half of it.

This generator asks for one number, the full kerf as your laser cuts it, and shows you how to measure it: cut the kerf test card, try each tooth in its notch, and read the value of the pair that slides in snugly. Every cut line then moves out by half the kerf, so after cutting each finger and each slot is exactly the size it was drawn.

How the box is checked before you download it

The box is built in 3D first. Each wall is a slab of your material, and where two walls meet, the overlap is shared out finger by finger. The flat parts are traced from that model. Before the download buttons appear, the page reads its own file back and checks three things: the sheet is at true size in millimetres, every cut is a closed line with nothing cut twice, and the parts, put back together in 3D, fill every wall exactly once. The ticks under the preview show the result.

Choosing the fit

Snug is right for most plywood and MDF: the joints close by hand and hold with a little glue. Press makes every finger 0.05 mm wider than its slot, so the box holds without glue in softer wood. Loose leaves 0.1 mm of play, which helps with acrylic or with warped sheets. Every option is measured from your kerf, so it means the same on any laser.

Using the file in your laser program

Cuts are red, scores blue and engraves black, the colours of LightBurn's layers 02, 01 and 00. Pick your program in step 3 to see what is left to set after import. For a closed box without a lid, see the finger joint box generator; for organisers, the tray generator.

Questions

What kerf should I enter?

The width of material your laser burns away, measured on your own machine and material. Most diode and CO2 lasers are between 0.05 and 0.3 mm. Cut the kerf test card once and read the value from the pair that fits snugly.

Inside or outside dimensions?

Choose inside when something has to fit in the box, outside when the box has to fit somewhere. The generator adds the material thickness for you.

Which file should I download?

SVG for LightBurn, xTool Creative Space, Glowforge and Inkscape; DXF for CAD and CNC software. Both are in millimetres at true size.

Is it free for commercial use?

Yes. You can sell the boxes you make with these files. There is no account and no download limit.

Are my settings uploaded?

No. The box is generated in your browser, and the files are saved straight from it.